SOFT GOODS ASSEMBLY & DISASSEMBLY
34
P/N 595360-01
Rev G
202004
3 On the waist pad, locate the webbing attached to the metal I-bar.
a Insert the metal I-bar into the slot at the base of the backframe and rotate it 90 degrees clockwise or
counterclockwise to “lock” it in place. See
for proper orientation of the I-bar.
Figure 2-19 Inserting the metal I-bar to attach the waist pad to the backframe
b Ensure that the webbing sits within the slot. Tug on the webbing to make sure it is securely attached to the
backframe.
4 Fold the waist pad under the backframe until it is flush.
5 Thread the ends of the waist pad retaining strap through the sewn loops on the waist pad and snap them in place
on the waist pad. (If you chose to unsnap only 1 end of the waist pad retaining strap, you will need to thread only
the unsnapped end through the waist pad loops.)
See
Figure 2-20 Threading the waist pad retaining strap through the waist pad loop and snapping it into place
CAUTION
Ensure that the I-bar is oriented properly within the backframe. Improper orientation of the I-bar within the
backframe may negatively impact respirator performance.
Rotate the I-bar 90 degrees clockwise or
counterclockwise to lock it in place. Orient it
as shown above.
Содержание SCOTT AIR-PAK X3 PRO
