48
Troubleshooting
Regarding the indicator lamps
/LJKWLQJDQGÀDVKLQJRIWKH32:(5LQGLFDWRUWKH/$03LQGLFDWRUDQGWKH7(03
indicator have the meanings as described in the table below. Please respond
in accordance with the instructions within the table. If the same indication is
displayed after the treatment, or if an indication other than the following is
displayed, please contact your dealer or service company.
POWER
indicator
LAMP
indicator
TEMP
indicator
Description
Lighting
In
Orange
Turned
off
Turned
off
The projector is in a standby state.
Please refer to the section “Power On/Off”. (
16
)
Blinking
In
Green
Turned
off
Turned
off
The projector is warming up.
Please wait.
Lighting
In
Green
Turned
off
Turned
off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In
2UDQJH
Turned
off
Turned
off
The projector is cooling down.
Please wait.
Blinking
In
Red
GLVFUH
tionary)
GLVFUH
tionary)
The projector is cooling down. A certain error
has been detected.
3OHDVHZDLWXQWLOWKH32:(5LQGLFDWRU¿QLVKHVEOLQN
and then perform the proper response measure using
the item descriptions below as reference.
Blinking
In
Red
or
Lighting
In
Red
Lighting
In
Red
Turned
off
The lamp does not light, and there is a
possibility that interior portion has become
heated.
Please turn the power off, and allow the unit to cool
down at least 20 minutes. After the projector has
VXI¿FLHQWO\FRROHGGRZQSOHDVHPDNHFRQ¿UPDWLRQRI
the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
,VWKHDLU¿OWHUGLUW\"
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the treatment,
please change the lamp by referring to the section
“Lamp”. (
41
)
Blinking
In
Red
or
Lighting
In
Red
Blinking
In
Red
Turned
off
7KHODPSGRRUKDVQRWEHHQSURSHUO\¿[HG
(attached).
Please turn the power off, and allow the unit to cool
down at least 45 minutes. After the projector has
VXI¿FLHQWO\FRROHGGRZQSOHDVHPDNHFRQ¿UPDWLRQRI
the attachment state of the lamp door. After performing
any needed maintenance, turn the power on again. If
the same indication is displayed after the treatment,
please contact your dealer or service company.
© 3M 2006 3M™ Digital Projector S15i