background image

8

9

Channel (radio frequency) 

Press the (+) button (A:11) or (–) button (A:12) to select between 30 available channels, see Radio Frequency Table. 

NOTE: The Federal Communications Commission (FCC) requires the operators of Business Radio Service (BRS) radio 

frequencies to obtain a license prior to use (Title 47 CFR Part 90). Contact the FCC for the license application forms, filing 

instructions and frequency availability in your area of use.

Radio Frequency Table

LiteCom

Plus

Channel

Frequency

(Mhz)

Type

Requires

FCC

License?

1

462.5625

FRS

No

2

462.5875

FRS

No

3

462.6125

FRS

No

4

462.6375

FRS

No

5

462.6625

FRS

No

6

462.6875

FRS

No

7

462.7125

FRS

No

8

467.5625

FRS

No

9

467.5875

FRS

No

10

467.6125

FRS

No

11

467.6375

FRS

No

12

467.6625

FRS

No

13

467.6875

FRS

No

14

467.7125

FRS

No

15

462.5500

FRS

No

PTT (Push-to-talk) button

Press and hold the PTT button (A:15 for built-in two-way radio or A:16 for auxiliary two-way radio) to open the two-way 

radio channel and then speak in to the microphone.  

NOTE: When pushing the PTT button, the headset will always transmit a signal regardless of the BCLO setting. 

VOX (voice-operated transmission)

VOX is a hands-free substitute for the push-to-talk (PTT) button.  With VOX, you simply speak into the microphone to open 

the channel.  The VOX setting defines the acoustic threshold that activates the radio transmission.  Higher settings are 

appropriate for louder environments.

To adjust the sensitivity of VOX, press the (+) button (A:10) or (–) button (A:11) when on the VOX menu setting.  You can 

choose between five levels or switch this function off.  To turn the VOX function on and off, press the PTT button twice.  

Alternatively, when on the VOX setting in the menu, press the (–) button for two seconds to turn VOX off.  Press the (+) 

button to switch this function back on.  If VOX is off, the PTT button must be used to transmit.

NOTE: By default, the Busy Channel Lock Out (BCLO) function will prevent VOX operation if the channel is occupied with 

other transmission (“busy”) and you will hear an audible tone to indicate the blocked transmission. These settings can be 

adjusted in the setup menu.

NOTE:  To effectively use VOX, the speech microphone (A:8) must be very close to your mouth, less than 3 mm (1/8 inch).  

You will hear your voice in the headset when the radio is transmitting. 

Sub menu 

The sub menu is accessed by pressing the (+) button (A:11) and (–) button (A:12) at the same time for one second and 

contains the features and settings listed below. To return to the main menu, press and hold the (+) button and (–) button at 

the same time again or wait 10 seconds and the headset will automatically return to the main menu.

LiteCom

Plus

Channel

Frequency

(Mhz)

Type

Requires

FCC

License?

16

462.5750

FRS

No

17

462.6000

FRS

No

18

462.6250

FRS

No

19

462.6500

FRS

No

20

462.6750

FRS

No

21

462.7000

FRS

No

22

462.7250

FRS

No

23

464.5000

BRS

Yes

24

464.5500

BRS

Yes

25

467.7625

BRS

Yes

26

467.8125

BRS

Yes

27

467.8500

BRS

Yes

28

467.8750

BRS

Yes

29

467.9000

BRS

Yes

30

467.9250.

BRS

Yes

EN

Содержание Peltor LiteCom Plus MT7H7A4610-NA


























Отзывы: