3M PELTOR ComTac 7 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 41

3M PELTOR ComTac 7 Скачать руководство пользователя страница 38

36

Will not send and/or

receive NIB

communications.

Ensure you are pressing and holding the NIB button on the headset when transmitting. Refer to

the manual for “3M™ PELTOR™ Tactical Modular Audio System”.
Make sure that the NIB button is pressed down during the complete message.
Make sure NIB is not in the “NIB OFF” mode.
Make sure to use the correct NIB frequency for you country. Refer to “9.6. NIB frequency”.

Ensure all headsets are set to the correct frequency.
The listener may be too far from the person transmitting. Refer to the User Instructions for

ComTac™ VII.
Too many people transmitting within the range of approximately 150 m/165 yd. Refer to

“11.1. NIB scenarios”.

12.3. SCU-300

Problem

Solution

The SCU-300 will not

power on.

Make sure the batteries are inserted correctly.
Make sure there are fully charged batteries in the SCU-300.

The SCU-300 will not

send and/or receive

radio communications.

Check the cable connection to the radio and the SCU. A voice message will indicate Radio

Connected.
Ensure the SCU-300 is powered on.
Check the radio volume.
Make sure the radio is on.
Make sure that you are transmitting on the correct frequency.

The SCU-300 will not

send and/or receive

intercom

communications.

Make sure there are fully charged batteries in the SCU-300.
Check the volume.
Make sure the intercom is on.
Make sure the intercom is connected. A voice message will indicate “Intercom Connected”.

Ensure the SCU-300 is in Hot Mic mode or that you are pressing the specified SCU PTT button

and the intercom PTT button if needed.

The SCU-300 will not

connect with or operate

the ComTac™ VII and/or

TEP-300.

Make sure there are fully charged batteries in the SCU-300.
Restart the ComTac™ VII and/or TEP-300. For more information see product manuals for

ComTac™ VII and/or TEP-300.
Restart the SCU-300.

Make sure the SCU-300 is correctly fitted and aligned with ComTac™ VII.

Refer to the manual for

“3M™ PELTOR™ Tactical Modular Audio System”.
Make sure the products in the 3M™ PELTOR™ Tactical Modular Audio System has been started

in the correct order. Refer to the manual for “3M™ PELTOR™ Tactical Modular Audio System”.
Press and hold the On/Off/Menu button on the SCU-300 for at least 10 seconds or until 2 short

beeps, indicates a successful pairing. The headset will indicate “NFMI pairing on”.
Do a factory reset of the SCU-300. Refer to “10.4.19. Factory reset”.

NFMI connection is

unstable.

If several users are placed close to each other, connect your headset to SCU-300 with the

headset cable. Refer to “5.4. To connect ComTac™ VII to the SCU-300”.

I get thrown out of the

menu.

The user automatically exits the menu if no button is pressed for 10 seconds.

EN

«
...
36
37
38
39
40
...
»

Содержание PELTOR ComTac 7










































Отзывы:

Нет отзывов