4
;
Before using this equipment, record the product identification information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
Table 1 –
Product Specifications
System Specifications:
Anchorage:
Anchorage structure requirements vary with the system application and whether it is a certified
anchorage or non-certified anchorage. The anchorage structure must sustain static loads applied in
the directions permitted by the anchorage connector.
System Application
Certified Anchorage
Non-Certified Anchorage
Defined by
Fall Arrest
2 times maximum
arresting force
5,000 lbf (22.2 kN)
OSHA, ANSI
Restraint
2 times foreseeable force
1,000 lbf (4.4 kN) per ANSI
5,000 lbf (22.2 kN) per OSHA
OSHA, ANSI
Work Positioning
2 times foreseeable force
3,000 lbf (13.3 kN)
OSHA, ANSI
Rescue
5 times applied load
3,000 lbf (13.3 kN)
ANSI
When more than one system is attached to an anchorage, the strengths stated above must be
multiplied by the number of systems attached to the anchorage. See ANSI/ASSP Z359.2 for more
information.
;
Anchorage must be approved by a Qualified Person.
Service Temperature:
-40°F to 130°F (-40°C to 54.4°C)
Standards:
Each product model is certified to, or conforms with, the applicable standards and regulations listed
within Figure 1. If none are specified, then all standards and regulations listed on the cover apply.
Component Specifications:
Figure 2
Reference
Component
Materials
A
Lifeline
(see Lifeline Specifications)
B
Housing
Nylon
C
Bottom Connector
(see Connector Specifications)
D
Top Connector
(see Connector Specifications)
E
Swivel
Zinc-Plated Steel
F
Energy Absorber
Nylon cover with Vectran lifeline
;
Internal Components:
Internal SRD components are made from a combination of Stainless Steel, Steel, and Aluminum.
Dimensions:
Figure 1 Reference
D
W
R
W
R
D
Size A
3.35 in.
(8.51 cm)
11.14 in.
(28.30 cm)
33.89 in.
(86.10 cm)
Lifeline Specifications:
Figure 1
Reference
Description
DP1
3/16 in. galvanized cable
