3M Multimedia Projector S15, Инструкция по безопасности продукта

Страница: 9 / 12

3M™ Digital Projector S15/X15 Product Safety Guide © 3M 2005 12
√
Note
Reset the lamp operation hours. See “Reset Lamp Hours” for details.
ENGLISH
3. Remove lamp module: Slowly pick up the lamp module by the handles. (5)
4. Insert lamp module: Carefully insert (5) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (4) to secure the lamp module in place.
Optional Lamp: 78-6969-9812-5 (Contact 3M customer Service.)
Insert the hinge tabs on the bottom of the lamp access door (6), then
push the center point of
two claws (7) to fix the lamp door.
(3) Lamp access door
(2) Claws
√ Note
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1.
Remove lamp access door:
Please loosen the screw (marked by arrow) (1). Then, unhook the
claws of the lamp door (2), and remove the lamp door (3).
2.
Retaining screws:
Use a screwdriver to unscrew the lamp module retaining screws. (4)
√ Note
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
(1) Screw marked
by arrow
(5) Handles
(4) Screws marked
by arrow
(7) Center point of
claws
(6) Tab