SETUP
IMAGE
OPTION
SETUP
IMAGE
OPTION
BRIGHTNESS
CONTRAST
COLOR
TINT
BRIGHTNESS
CONTRAST
POSITION
PHASE
H SIZE
MAC MODE
MP8660 Quick Reference Setup Instructions
MP8660 Projector
Remote Control
Transmitter
Video Cable
(S-Video mini DIN4-pin)
Lens Cap
Power Cord
(US, Euro, UK)
VGA Cable
(15-15 pin M/M)
MAC Adaptor
3-Conductor
Video/Audio Cable
Serial Mouse
Cable
ADB Adaptor
Cable
PS/2 Adaptor
Cable
RCA to Stereo
mini jack
Hexagon
Wrench
Gender
Changer
Remote Control Transmitter
Navigating System Menus
Projector Packout
Projector Operation
Press STANDBY/ON to switch projector between projection and standby mode. In
projection mode the lamp is ON. In standby mode the lamp is OFF.
Press BLANK to display a black background with no image. Press again to return the
image to the screen.
Press MUTE to switch the audio sound ON or OFF.
Press ZOOM (
YB
) to increase or decrease the size of the screen image.
Press FOCUS (
YB
) to increase or decrease the sharpness of the screen image.
Press VOLUME (
YB
) to adjust internal/external speaker volume.
Press BACK LIGHT to light the remote buttons.
Press RGB to switch computer video input (RGB1
⇒
RGB2
⇒
RGB1).
Press MENU to display the on–screen menus. Move the mini–joy stick up/down or
left/right as needed to nagivate the menu options. Note: Press SELECT to choose the
option that is highlighted.
Press SELECT (L) to choose the highlighted menu option. Refer to On–Screen Menus in
Section 4.
Press RESET to reset menu options to the factory default setting. Refer to On–Screen
Menus in Section 4.
Press VIDEO to switch between video inputs (VIDEO1
⇒
VIDEO2
⇒
VIDEO1).
When all cable connections are complete, turn on the projector
power first, then the power to the input sources.
1. Turn projector power “ON.” Main power switch is located on
backside of projector.
2. Remove lens cap.
3. Press the STANDBY/ON button. Power indicator turns
from amber to green
4. Power up input devices.
5. Press the RGB or VIDEO button to select input device.
6. Press the ZOOM +/– button to adjust image size.
7. Press the FOCUS +/– button to adjust image sharpness.
8. Press the /– button to adjust speaker volume.
9. Press the MENU button to display and SELECT arrows to
select menu options.
10. To shutdown projector, press STANDBY/ON button. Power indicator
will turn from green to amber.
Press the MENU button on the projector control panel or remote
control keypad to display the Main Menu. Press the up/down
arrows
YB
or move the mini–joy stick up/down to move
vertically within a menu, sub–menu or adjustment screen.
Press the left/right select arrows
A "
on the projector control
panel or move the mini–joy stick left/right to move horizontally
within a sub–menu or adjustment screen.
Press the SELECT button on the control panel or the SELECT (L)
button on the remote to enter a selected adjustment screen.
SETUP
IMAGE
OPTION
RGB ONLY
VIDEO ONLY
MESSAGE
ON
OFF
MIRROR
NORMAL
H INVERT
V INVERT
H&V INVERT
LENS RETRACT
AUTO
MANUAL
LANGUAGE
AUTO OFF
YES
NO
BEEP
ON
OFF
SPECIAL
TEST SCREEN
FIRMWARE REV.
SVGA56
H XX.X KhZ
V XX.X KhZ
LAMP TIMER
1000 Hours
PANEL
BLUE 00
GREEN 00
LANGUAGE
BOTH
FRONT
REAR
Projector Control Panel
ENGLISH
FRENCH
SPANISH
GERMAN
