St ep 3b . (For VGA Connectivity) Connect the 3M MPro110 VGA cable to your specific device’s VGA cable.
Note: Some devices may require additional adapters to convert their video signals to the VGA format.
St ep 4. That’s it! Turn on the 3M MPro 110 and your device, and you’re ready to start sharing your pictures, presentations
or video on any surface, almost anywhere.
A word about video cables:
These cables are normally very specific to the device you own. One end will have a special connector that goes to the
device, while the other end will have either an RCA connector or VGA connector that goes to the micro projector.
If your standard device accessory kit does not include this cable, you will need to purchase this cable from the device
manufacturer or your local electronics retailer. Each cable is very specific to the device, and not all cables are made alike
(even if they appear to have the same connectors on either end). An additional adapter may be necessary in some cases.
© 3M 2008. All Rights Reserved.
