manualshive.com logo in svg

3M MicroTouch Display C1700SS, Руководство по установке

Поделиться
Скачать
3M MicroTouch Display C1700SS Скачать руководство пользователя страница 20

20 

3M™ MicroTouch™ Display C1700SS Installation Guide 

 

3M Touch Systems Proprietary Information

 

The utility sub-menu will supply information on the current video signal being received. 
It will also allow you to reset the display to the factory default video settings. If you wish 
to do this, select the reset option. There is an option to disable the Display Power 
Management System (DPMS) power saving of the display. However, this is not 
recommended. 

Color Temperature 

This option will activate a sub-menu, allowing the operator to adjust the color balance 
and level for the display. There are 3 color presets C1, C2 and C3, plus an option for user 
customized settings.  

By adjusting a single color, you can make the picture look warmer (biased towards red) 
or cooler (biased towards blue). Adjusting all three levels will make colors appear more 
or less striking. 

 

Содержание MicroTouch Display C1700SS

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды