Kiosk ePassport Reader User Guide
DT-01822A
© 3M 2007 All rights reserved.
12
Connecting the Power Supply
The reader is designed to be powered from a switched, UL-listed power source supplied with the
kiosk and terminating in a suitable DIN connector. The reader is not supplied with a power cable
or power supply and does not have a power switch.
Connect the DIN connector from the power supply to the power connector at the rear of the
reader, and secure or tie-off the cable as required.
A suitable power supply, p/n CA000006747, may be purchased from 3M if required. Contact
your Sales representative or 3M Global Technical Services (GTS) for details.
Connecting to the Host System
The reader is supplied with a 2-meter USB A-B communication cable.
1.
Insert the USB connector of the supplied cable into a USB port on the host system.
2.
Insert the USB connector of the supplied cable into the USB port, located on the back
panel of the reader.
3.
Secure or tie-off the cable as required.
