3
SAFETY INFORMATION
Read, understand and follow all safety information contained in these instructions prior to use of
the 3M
TM
Filtered Water Dispenser. Retain these instructions for future reference.
Intended Use:
The 3M
TM
Filtered Water Dispenser is intended for use in
filtering potable water for
commercial spaces
and has not been evaluated for other uses. The system is typically installed at point of use, and must
be installed by a
3M certified professional
installer according to installation instructions.
Explanation of Signal Word Consequences:
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury and/or property damage.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result
in property damage.
WARNING
About the Power Supply
•
Plug the power cord into a 230V outlet with at least a rating of 10A and power surge protection.
•
Do not
plug in multiple devices into the same power outlet or extension cord simultaneously.
•
Please ensure that the power plug and power outlet are clean and dry.
•
Do not
use the equipment if there is any damage to power cord, plug or the outlet.
•
Damaged parts are only to be repaired or replaced by 3M certified professionals.
•
In case of water leakage, please unplug the device immediately.
•
Always switch off and unplug the equipment before inspection, repair or replacement of its
components.
Issues During Installation/Use
•
Do not
install in direct sunlight or outdoors. The equipment is designed for indoor use only. Areas with
high moisture/humidity or dust may damage the equipment. Direct sunlight and high temperature may
result in color changes.
•
Do not
place the equipment on uneven surface.
•
Do not
place it in an area with potential for gas leak, or near a heating device. Do not place any
heating device on top of the dispenser.
•
Do not
place the device in an area where temperature falls below 0º C as the internal components may
freeze, causing system breakdown. In the event that the water source is frozen and cannot be supplied
to the device because the surrounding temperature has fallen below 0 ºC, please turn off the hot water
system for safety.
•
Do not
place any objects on top of the equipment.
