64220, Rev. 1/April 2019
3M™ GMI™ PS200-LMP AUTO BUMP/CALIBRATION STATION
RE-CONFIGURING THE ABC
7-1
7. RE-CONFIGURING THE ABC
7.1. View/Edit Software Configuration
The default configuration for the ABC is as follows:
7.2. Edit ABC Configuration
The USB memory stick supplied with the ABC contains the file
PS200-LMP Settings.exe
. This file
allows a new ABC configuration to be created on the USB memory stick which can then be trans-
ferred to the ABC.
1. Insert the USB memory stick into a PC/Laptop.
2. The typical contents of the USB memory stick are illustrated in
Figure 7-1: USB Memory Stick Contents
3. Select
PS200-LMP Settings.exe
to display the Settings window (see
).
Figure 7-2: PS200-LMP Settings
Bump Test or Calibration: Calibration
Gas 1:
2.5% methane (CH4) and 100ppm carbon monoxide (CO)
Gas 2:
100% methane (CH4)