DT-01715C
Travel Document Reader User Guide
© 3M 2006 All rights reserved.
9
Figure 11: Complete the Installation
7.
Click
Done.
8.
If desired, create desktop shortcuts for the
SalesDemo
and
ePassportDemo
and
RFissuer
(ePassport Reader only) applications.
These applications are installed by default in the C:\Program Files\3M Document
Authenticator folder and are used to verify or troubleshoot reader operation.
9.
You are now ready to install your reader.
Connecting to a Host System
The reader is supplied with a USB communication cable.
1.
Insert the USB connector of the supplied cable into a USB port on the host system.
2.
Insert the USB connector of the supplied cable into the USB port, located on the back
panel of the reader.
Note:
The ends of the USB cable are keyed (square for the reader and rectangular for
the PC) for easy identification.
Connecting the Power Supply
1.
Connect the DIN connector from the power supply to the power connector at the rear of
the reader.
Note:
There is only one orientation that will allow the DIN cable to be connected to
the shielded power port.
2.
Connect the AC cable to a functioning power outlet.
3.
Turn on the power switch.
Содержание Full Page Reader
Страница 8: ......
