background image

12

 

Prior to installation and use of this equipment, record the product identi

fi

 cation information from the ID label in the 

Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the Flexiguard

®

 Counterweight Trailer Fall Arrest System. The Counterweight Trailer Fall Arrest System is 

a vehicle towed fall protection systems with overhead anchorage connections for two people. They are intended for use as 

anchorage in a Personal Fall Arrest System (PFAS). 

Figure 2 illustrates components of the Counterweight Trailer. See Table 1 for Component Speci

fi

 cations. The system is comprised 

of two Boom Arms (A) Anchorage Connection Points (B) mounted on an Adjustable Mast (C) extending from a Counterweighted 

Trailer (D). The base of the Adjustable Mast has a Hand Crank Chain Drive (E) to adjust the height of the Mast. The 

Counterweighted Trailer is equipped with a Lunette (Pintle) Ring (F) or Ball Coupler for towing behind a vehicle with an SAE Class 

4 Hitch. Leveling Jacks (G) and a Tongue Jack (H) are used with an onboard Slope Indicator (I) to stabilize and level the system. 

Table 1  –  Speci

fi

 cations

System Speci

fi

 cations:

Capacity

:

One SRL per each Boom Arm Shock Absorbing Anchorage Point.

1 Person per SRL with a combined weight (clothing, tools, etc.) less than or equal to 310 lbs (141 kg).

Tow Vehicle:

The Tow Vehicle and Hitch Receiver must be properly equipped to handle the System Speci

fi

 cations (System Weight, Tongue 

Weight, etc.).

Anchorage:

Structure supporting the Counterweight Trailer Fall Arrest System must withstand a 7,000 lb (31 kN) vertical load.

Anchor Height:

Adjustable Mast allows for 12.75 ft - 20.5 ft (3.88 m - 6.25 m) Anchor Height.

Offset:

3.9 ft (1.19 m)

Total System 

Weight:

Approximately 5,700 lb. (2,585 kg) with Concrete

System Tongue 

Weight

Approximately 570 lb (259 kg)

Component Speci

fi

 cations:

 Figure 2 

Reference

Component

Materials

Note:

A

Head Assembly and Boom Arms

Steel

Maximum Capacity: 1 person up to 310 lbs 

(141 kg) including clothes, tools, etc. per Boom 

Arm and Anchorage Connection Point

B

Anchorage Connection Points

Alloy Steel

C

Adjustable Mast

Aluminum and Steel

D

Counterweighted Trailer

Frame - Steel

Drawbar - Steel

Counterweight - 0.75 yds of 

4,000 psi Concrete

Dry Trailer Weight: 1,197 lb (542.95 kg)

Dry Tongue Weight: 154 lb (69.85 kg)

Weight with Concrete: 4,097 lb (1,858.37 kg)

Electrical System: 12 Volt

Counterweight: 2,900 lb (1,315.42 kg)

E

Hand Crank Chain Drive

Crank - Steel

Base - Aluminum

Chain Cover - Steel

Chain - Steel

Gears - Steel

F

Lunette (Pintle) Ring or Ball Coupler

G

Leveling Jack

Steel

H

Tongue Jack

Steel

I

Slope Indicator

Plastic

1  Anchorage Connection Points:

 Each Anchorage Connection Point has been tested and veri

fi

 ed to a safety factor of 2:1 per OSHA.

Содержание FLEXIGUARD





















Отзывы: