LABELING
The following labels should be securely attached to the Flexiguard system and fully legible:
A
A
B
D
C
C
B
C
D
READ INSTRUCTIONS:
The user/rescuer must read and
understand these instructions
or have them explained to them
before using this equipment.
A
9510749 REV B
FlexiGuard
CUSTOM FALL
PROTECTION SOLUTIONS
TM
PORTABLE COUNTERWEIGHTED
RAIL SYSTEM
STEP 1:
ENGAGE THE FRONT OR SIDE FORK POCKETS WITH A
FORKLIFT CAPABLE OF SUPPORTING THE ENTIRE SYSTEM WEIGHT.
STEP 2:
POSITION SYSTEM SO THAT GLIDERAIL IS OVER THE
DESIRED WORK SURFACE. ONCE IN PLACE, ROTATE EACH STABILIZ-
ING JACK UNTIL THE SYSTEM IS LEVEL.
STEP 3:
PULL DOWN THE TAG LINE TO CONNECT TO THE SRL (NOT
PROVIDED) USING A FULL BODY HARNESS.
STEP 4:
SYSTEM USERS MUST STAY WITHIN THE SAFE WORKING
AREA.
SEE FIGURE 1
WARNING
R
FIGURE 1
SAFE WORKING AREA
OPERATORS INSTRUCTIONS
PERSONS
• THIS SYSTEM IS APPROVED FOR USE WITH RETRACTABLE DEVICES
AND SHOCK ABSORBERS WITH A MAXIMUM ARRESTING FORCE(M.A.F.)
RATING OF
900 lb (4kN)
OR LESS.
• TRANSFERRING FROM ONE SRL TO ANOTHER
MUST BE
DONE SO
YOU ARE ATTACHED TO AT LEAST ONE SRL AT ALL TIMES.
• NO MORE THAN ONE PERSON MAY BE ATTACHED TO A GLIDE RAIL
TROLLEY AT ANY GIVEN TIME. SEE BELOW TO DETERMINE THE
MAXIMUM NUMBER OF PERSONS ABLE TO USE THIS SYSTEM. NEVER
EXCEED THE MAXIMUM USER RATING.
• ALL USERS MUST READ AND UNDERSTAND THE INSTRUCTIONS
PRIOR TO USING THIS SYSTEM.
• BEWARE OF OVERHEAD POWER LINES
OR OTHER HAZARDS WHICH MAY CAUSE
ELECTRIC SHOCK.
• SYSTEM MUST BE WITHIN 1 DEGREE OF
LEVEL PRIOR TO USE.
• THE CORRECT AMOUNT OF COUNTER-
WEIGHT MUST BE INSTALLED PRIOR TO
THIS MAN-RATED SYSTEM IS DESIGNED FOR
A MAXIMUM OF
USER CAPACITY IN ACCORDANCE WITH
MANUFACTURER’S INSTRUCTIONS. FAILURE
TO COMPLY MAY RESULT IN SERIOUS INJURY
OR DEATH.
2
6’
6’
6’
6’
SA
FE WORKIN
G A
REA
SAFE WORKIN
G A
REA
COUNTERWEIGHT
PAD
