Safety Information
Please read, understand, and follow all of the safety
information contained in these instructions prior to
using the Filtrete™ Ultra Slim Air Purifier.
READ AND
SAVE THESE INSTRUCTIONS
for future reference.
Intended Use:
The Filtrete™ Air Purifier is intended for indoor
household use, with Filtrete™ brand filters and
standard 120V AC power. This Air Purifier has not
been tested with non-Filtrete brand filters, operated at
different voltages, or used outdoors. Each of these
misuses could damge the Air Purifier and/or create
unsafe operating conditions.
1
Safety Information
Explanation of Signal Words
Indicates a potentially hazardous
situation, which if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous
situation, which if not avoided, may
result in minor or moderate injury.
W a r n i n G
C a u t i o N
FCC Information for the Remote Control
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
FCC ID: DGFCHIMFAP-04
Modifications to this device shall not be made without the
written consent of 3M Company. Unauthorized modifications
may void the authority granted under Federal Communication
Rules permitting the operation of this device.
2
