21
3.11 Applying alarm / reminder settings to projectors in a group
You can set alarm / reminder settings to multiple projectors in a group at the same time. Select the group that
you want to set the alarm / reminder for and then select [Edit]
[Alarm Time Setting] from the menu. The Alarm
Time Settings dialogue will appear. Check the checkbox and enter the hours that the alarm / reminder will be
activated.
If you apply new settings to the group, the individual alarm / reminder setting on each projector will be
overwritten.
3.12 Update
Status
Select [View]
[Refresh] to update status of a group or individual projector. This function only works when the
status tab is displayed.
3.13 Search queries (in Status view)
In order to make the search queries, select [View]
[Search] from the menu. The Search dialogue will appear.
Connection
--- Search by connection type.
IP Address
--- Search by IP address range.
Power
--- Search by projector power status.
Status
--- Search by error / warning status.
Lamp Time
--- Search by lamp hours.
Filter Time
--- Search by filter hours.
Total Run Time
--- Search by total operation hours.
All or part of the projector name
--- Search by projector name.
The search group will be added to the Search Result tree, when you press [Search] bottom with given query.
The list of projectors that are matched with your search query will be shown in the Status View.
© 3M 2012. All Rights Reserved.
