3M™ Digital Projector WX66 Product Safety Guide
10
ENGLISH
© 3M 2008. All rights reserved.
Lamp
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at
www.lamprecycle.org
In Canada, contact 1-800-364-3577 (3M Canada)
WARNING
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the “OPTION” using the
▼
button, and press the
►
button or the ENTER button.
Choose the “LAMP TIME” using the
▼
button.
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
√
Note
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication of elapsed lamp time.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
(2) Point at the “Go To Advance Menu …” in the menu using ▼/▲ button, then press the
► button.
(3) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press
the ► button.
(4) Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will
appear.
(5) Press the ▲ button to select “RESET” on the dialog. This resets the lamp time.
