3M Digiral Walldisplay 9200IW, Руководство оператора, Страница: 37 / 62

37
3M™ Digital WallDisplay
© 3M 2004. All Rights Reserved.
E
N
G
L
IS
H
Using the 3M Digital WallDisplay as a Copyboard
Copyboard Mode (9200IC)
This mode lets the 3M Digital WallDisplay unit capture all the data from the screen and print it to a printer
connected directly to the 3M Digital WallDisplay. No computer is needed to run this system. This mode should
be used without projection.
Projection Mode
The second way to use Whiteboard Display with a computer is in Projection mode. In this mode, your
computer’s desktop is projected on the 3M Digital WallDisplay screen and the Whiteboard system can be used as
a touch screen. For this mode, use the eBeam Interactive Stylus instead of the dry-erase markers. The Interactive
Stylus is used the same way a mouse is used on a PC (including the right-click function), but the
Print
and
Clear buttons will have no effect.
Using Copyboard Mode (9200IC)
Printer Computer
Top LED Light Legend
NO DATA IN MEMORY
MEMORY CONTAINS DATA
BOARD IS RECEIVING DATA
(No light)
(Quickly blinking green)
(Slowly blinking green)
CONNECTION ERROR
PRINTING ERROR
(Solid red)
(Slowly blinking red)
DATA IS PRINTING
(Blinking with alternating
green and amber))
1. Make sure the Master Power Switch is on and that the 3M Digital WallDisplay is plugged in.
The
On/Off Button
does not need to be turned on.
2. Use the digital markers to write on the board. Use the digital eraser or cloth to erase any markings. A
printer will need to be plugged in to the printer port for direct print option.
3. Press the top bezel button to print.
4. Press the bottom bezel button to clear the page and any information stored in the buffer.