3M DBI-SALA Nano-Lok edge 3500266, Инструкция по эксплуатации, Страница: 18 / 24

18
8.0 LABELS
Figure 19 illustrates labels on the Self-Retracting Devices and their locations. All labels must be present on the SRD. Labels must
be replaced if they are not fully legible.
A
Read instructions.
Information about methods of maintenance and methods of recycling.
Maximum user weight: 1 user, user weight (including clothing, tools, etc.) should not exceed 140 kg.
Date of manufacture (indicated on the components of the product and / or on the packaging in
the format MM / YY).
LOT
Batch/Lot number
REF
Model/Part number
The packaging is not intended to come into contact with food.
Possibility of utilization of the used packaging.
G
Galvanized Steel
SS
Stainless Steel
1
Do not place the SRD housing on an edge during use.
2
Correct way of connecting SRD to harness.
3
Store and transport SRDs in a cool, dry, clean environment out of direct sunlight.
4
Inspect the device before use.
5
Inspect locking of the SRD before use.
6
Temperature usage range.
7
May be connected to an anchorage point above, below, or level with the dorsal D-Ring (140 kg maximum).
8
Do not repair.
9
Always allow the lifeline to recoil back into the SRD housing under control.
10
Do not remove labels.
B
Single Unit
C
Twin Unit
D
Harness Interface Stampings. XX=Year Manufactured (1), YY=Heat Lot/Batch Code (2), Supplier Part Number
(3).