3M D-2475, Руководство по эксплуатации

Страница: 9 / 13

3M Model D-2475 Using the D-2475
© 3M 2001 January
5
4. Press the HOLD key again.
The display shows HOLD = 01 and LIS. The second call is
still on hold and the Selector is connected to the first caller.
5. Press and release the TALK key to converse with the first
caller.
6. Press the STD BY key when finished.
The display shows HOLD = 01 and SBY and the Selector
beeps.
7. Press HOLD.
The display shows the second station number and LIS.
8. Press and release the TALK key to converse with the second
caller.
9. Press the STD BY key when finished.
Calling From Selector to Call
Station
There are three ways to call from the Selector to a Call Station:
•
Select a specific Call Station.
•
Use directory assistance.
•
Use All Call Mode. See All Call Mode .
Select A Specific Call Station
System must be in Standby mode. To select a specific Call Station:
1. Press the key associated with the Call Station being called
(Call Stations 1 through 9 are entered as one digit).
Display shows the Call Station number and name.
2. Proceed as described under Steps 2 through 4 under the
previous section
One Call Station Calling Selector.
: HOLD=01 :LIS
S=12: PUMP # 12
: HOLD=01 :SBY
_:Press ‘HOLD’
: :LIS
S=08: PUMP # 08