3M C960SL, Руководство по эксплуатации

Страница: 20 / 27

Maintenance Model C960SL
14

3M 2003
To condition a battery:
1. Insert the battery in the charging/conditioning slot as shown in Figure 12.
2. Press the conditioning button within 2 seconds after inserting the battery.
The indicator lights YELLOW to indicate the battery is being conditioned.
3. When the conditioning cycle ends, the Conditioning Status Indicator will
glow green.
9
Note
Conditioning leaves the battery in a charged state.
Figure 12.
To help protect the environment, C960SL rechargeable batteries which have
reached the end of their useful life should be disposed of in accordance with
local requirements.
Follow these tips to make sure batteries are always ready for use:
•
Have at least one extra battery for each belt pack. This helps ensure that a
fully charged battery is always available.
•
Recharge a low battery as soon as it is removed from the transceiver pack.
•
Keep the battery contacts clean: both those on the battery and those in the
belt pack. To clean the contacts, use an alcohol-moistened cotton swab.
•
Remember that a battery recharge takes approximately 1-1/2 to 2 hours.
•
Avoid removing and reinserting batteries while they are charging
(charging status indicator is RED).
•
Remember that batteries discharge fastest during Talk and Page operation.
Avoid unnecessary communications.
Disposing of Batteries
Making Sure Batteries
are Ready for Use