Limitations of use:
Only use with original 3M Speedglas brand spare parts and
accessories listed in the reference leaflet and within the usage
conditions given in the Technical Specifications.
The use of substitute components or modifications not specified
in these user instructions might seriously impair protection and may
invalidate claims under the warranty or cause the product to be
noncompliant with protection classifications and approvals.
3M Adflo Powered Air Respirator must not be used in the
power OFF state since a rapid build-up of carbon dioxide and
depletion of oxygen within the headtop may occur.
Do not remove the headtop or turn off 3M Adflo Powered
Air Respirator until you have vacated the contaminated area. In the
power OFF state little or no respiratory protection is expected.
3M™ Adflo™ Powered Air Respiratory System must not
be used if 3M Adflo Powered Air Respirator does not supply enough
air (low flow alarm).
3M Adflo Powered Air Respiratory System must not be
used in flammable or explosive environments.
Note that the breathing tube might make a loop and get
caught up by something in the surrounding area.
If you are not sure about the concentration of airborne
pollutants, ask an occupational hygienist or safety professional. The
manufacturer is not responsible for injury following incorrect use or
incorrect choice of equipment.
Always correctly use and maintain the product according to these
instructions. Failure to do so may cause fire or explosion or could
adversely affect respirator performance and result in injury, sickness
or death.
Do not open, crush, disassemble, dispose of in fire, heat above
60°C or incinerate.
To avoid damage to the equipment do not use solvents for
cleaning. Do not immerse in water or spray directly with liquids. Do not
wipe the electrical contacts.
The particle filter indicator reflects particle clogging only. The
service life of the gas cartridge, when used, must be estimated
independently in accordance with a change out schedule. Failure to
do so may result in sickness or death.
Technical specification
Weight
3M Adflo Powered Air Respirator
(incl. P-filter, excl battery)
690 g
Manufacturers minimum design flow
rate
Nominal airflow
Airflow Plus
160 l/m
170 l/min
200 l/min
Belt size
75-127 cm
Operating temperature
-5ºC to +55ºC
Battery life
App. 500 charges
Unit 13, 39 Herbert Street • Artarmon NSW 2064 • Australia
Tel: (02) 9439 0111 • Fax: (02) 9439 0100
E-mail: [email protected]
Website: www.awsispeedglas.com.au • www.awsi.com.au
Содержание Adflo
Страница 3: ......
