83
The date and the time display the 965DSP “system
clock.” See the “Set Clock” section on page 12 for
further information on setting the clock, and also for
information on the format of the date and time.
Use the blue keys to enter an alphanumeric ID. The ID
may have up to fourteen characters. Because there are
not enough keys for all twenty-six letters, each of the
number keys (except “1”) also function as letter keys
for ID entry. Whether a number or letter is entered
depends on how many times the key is pressed. As an
example, if the Ohms key is pressed once, the number
“3” will be displayed. If the same key is pressed
twice, the letter “d” will be displayed, three times
for the letter “e” and four times for the letter “f”.
When the desired number or letter is displayed, press
any other key to insert the next number or letter.
This will cause the previously entered characters to
move to the left making room for the new character.
If the same key needs to be used multiple times in
a row (i.e. to enter the sequence ‘ABC2’), press the
[Up] arrow to insert multiple spaces to the left of the
cursor. Use the [Left] arrow to position the cursor
under the first space and enter the first character,
and then use the [Right] arrow to move the cursor
under the next space. Insert the next character and
use the [Right] cursor again to position the cursor
to the next position. Continue entering numbers or
letters in this manner until all have been entered. If
you enter more than 14 characters, the first entered
character will be discarded. To change or delete any of
the characters that have been entered, use the [Right]
or [Left] key to move the cursor under the letter to be
changed or deleted. To delete the character, press the
[Down] key. To change the character, press the key of
the new character once (for a number) or several times
(for a letter). Once the ID has been entered, press
the [Enter] key to save the current ADSL test results
unless the User Info option (see User Info Setup page
19) is enabled. If User Info is enabled, you will see
another edit screen as shown below.
