3M 812 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 17

3M 812 Скачать руководство пользователя страница 4

2

Safety Information

Read, understand, and follow all safety information contained in these
instructions prior to installation and use of the 3M™ Conversion
Station Model 812. Retain these instructions for future reference.

Intended use

The 3M Conversion Station Model 812 is intended for use in converting
library items that use optical barcode technology to RFID technology using
3M™ RFID Tags.

The Model 812 is designed and intended for use in an indoor library
environment. It has not been evaluated for other uses or locations.

EXPLANATION OF SIGNAL WORD CONSEQUENCES

DANGER:

Indicates a potentially hazardous situation, which, if not avoided, will
result in death or serious injury and/or property damage.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury and/or property damage.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may
result in property damage.

EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS

Attention: Read accompanying
documentation

Warning: Risk of Electric Shock

Warning: Not a Step

Caution: Mercury disposal hazard

«
...
2
3
4
5
6
...
»

Содержание 812


















Отзывы:

Нет отзывов