2
1.0
Overview
1.1
3M™ No Polish Connectors 8832
-
JG1 & 6832
-
JG1 termi-
nate 1.6mm and 2.0mm jacket cable
.
CAUTION
To reduce the risk associated with eye injury:|
-
Safety glasses should be worn when handling chemicals and cleaving the optical fiber.
Protective Eyewear
Safety Precautions
WARNING
To reduce the risk associated with fire:
-
Storage, use and disposal of isopropyl alcohol should be per your company health, safety and environmental instruc-
tions. Refer to material safety data sheet for health hazards, safe handling, proper use and control measures.
Chemical Precautions
CAUTION
To reduce the risk associated with eye or skin irritation from fiber gel in connector:
-
Product contains phenylmethyl silicone (63148
-
58
-
3), hydrophobic silica (68611
-
44
-
9) and may cause minimal eye
irritation. Avoid contact with eyes and wash hands before eating or smoking. Upon eye contact, immediately flush
eyes with water while holding eyelids open and continue flushing for ten minutes. Contact a physician. Upon skin
contact, wash with soap and water. Refer to Safety Data Sheet for product information
CAUTION
To reduce the risk associated with handling sharp glass fibers:
-
Cleaved glass fibers are sharp and can pierce the skin. Use tweezers when handling shards and dispose of them
properly per your company health and safety instructions.
Bare Fiber Handling
NOTICE
To reduce the risk associated with fiber damage:
-
Optical fiber can be damaged by excessive tensile, compressive and bending forces. Consult the manufactures’ spec-
ifications for proper handling instructions.
Fiber/Cable Handling
CAUTION
To reduce the risk associated with eye damage from exposure to laser light:
-
Take the proper precautions when working with optical fiber because invisible laser light may be present. The prin-
cipal laser hazard when working with fiber optics is injury to the eye. Never look directly into the fiber or connector
using the naked eyeor a microscope.
LASER Safety