1
2
3 4 5 6 7
Reader Equipment Installation
4
3M Toll RFID Reader 6204
Quick Start Guide
To mount the 6204 reader assembly, refer to Figure 3 and perform the
following:
1
Prepare the mounting surface to accept the 10 mounting bolts. The
hole pattern should match that shown in Figure 3 and the mounting
surface must be able to support 11 lbs (5 kg).
2
Mount the reader.
3
Locate the Interface Cable.
4
Connect the cable to the reader’s bulk head connector and twist to lock
in place.
5
Connect the antenna cables (see Figure 4).
6
Adjust the angle of the antennas and tighten the hardware.
WARNING:
FCC Radiation Exposure Statement. The antennas used for this transmitter
must be installed to provide a separation distance of at least 1 meter from all
persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.
