3M 5811 Series, Руководство по установке

Страница: 7 / 12

Note: The ground braid assembly and constant force spring are not used for this application.
6.1 Check to be sure cable size fits within the kit range as shown in Table 1, page 3.
• Remove cable jacket for 8
1
⁄
4
" (210 mm).
6.2 Remove white liners from 1 mastic strip and apply 1 wrap around cable jacket
1
⁄
2
" (13 mm) from edge. Apply with
light tension. Cut off excess mastic.
• Bend neutral wires back over mastic strip and secure to cable jacket 2" (51 mm) from jacket end. Keep wires
separated and spaced around cable.
6.3 Remove white liners from 2nd mastic strip and apply 1 wrap over neutral wires and previously applied mastic strip.
• Press neutral wires into mastic by applying 2 highly stretched half-lapped layers of vinyl tape over mastic and
bent-back neutral wires.
6.4 Continue cable preparation.
• Remove semi-con (insulation shield) for 5
7
⁄
8
" (149 mm), leaving 2
3
⁄
8
" (60 mm) exposed beyond cable jacket.
• Remove cable insulation for 2
1
⁄
8
" (54 mm).
• Place a
1
⁄
8
" (3 mm) bevel on end of cable insulation to ease installation.
6.0 Preparation of Jacketed Concentric Neutral Cable
6.1 6.2 6.3 6.4
7
78-8124-4544-9-B