3M 4588V-QCS Series, Инструкция по эксплуатации

Страница: 2 / 10

2 78-0013-1813-4-A
1.0 General
The 3M
™
Indoor Protected Building Entrance Terminal (IBET) 4588V-QCS Series provides electrical protection
and a termination point for outside plant cable (feeder) and indoor house wiring (distribution). The 4588V-QCS
IBET is Underwriters Laboratories (UL 348X) Listed.
1.1 4588 Series IBET Names, Pair Capacity and Module
4588QCS-HCCA/25SD 25-pair HiCat Indoor Building Entrance Terminal with 710 SD
4588QCS-HCCA/50SD 50-pair HiCat Indoor Building Entrance Terminal with 710 SD
4588QCS-HCCA/100SD 100-pair HiCat Indoor Building Entrance Terminal with 710 SD
1.2 IBET Parts and Components
a) Connectorized tails with 3M flame-retardant
modules. 3M
™
MS²
™
Super Mini Splicing
Module 4000-D/CO, 3M
™
MS²
™
Fire Retardant
Pluggable Module 4005-DPM/FR or 3M
™
710
Splicing System SD modules.
b) Splice chamber, for the feeder cable, with
cable strain relief. (Note diagram)
c) Insulated #6 ground strap for the feeder
cable.
d) External bottom-mounted three point ground
bar and top-mounted single point ground
bar. (Note diagram)
e) Numbered standard 5-pin protector
receptacle field. (Note diagram)
f) Binding post log and instruction label.
g) The 3M
™
Single Pair Test Probe and Dish.
h) Fully lockable protective cover.
i) Three (3) screws (2 small and 1 large)
to wall mount the IBET Terminal. (Note
diagram)
4588 QCS-50
1.3 IBET Dimensions and Wiring Schematic
Model Height Width Depth
4588QCS-25 12.46 12.47 4.83
4588QCS-50 12.46 12.47 4.83
Module
From C.O.
Protector
2810 Block
26 AWG Fuse Wire
4588V-QCS Wiring Schematic
1.4 Protector Specifications
Use ONLY UL Recognized or Listed five-pin
protectors in the 4588V-QCS terminal.
1.5 Special Tools Needed to Install
3M MS
2
modules or 3M 710 connectors (Not
required if 3M
™
Scotchlok
™
Connectors are used)