manualshive.com logo in svg

3M 3M-Matic 800r3, Инструкция и перечень запасных частей, Страница: 23 / 120

Поделиться
Скачать
3M 3M-Matic 800r3 Скачать руководство пользователя страница 23

18

Operation 

(Continued)

1. Turn main air valve "On".

2. Push electrical switch "On" to start drive belts.

3. With access door closed, feed boxes to machine

at minimum 460 mm [18 in] intervals.

WARNING – Keep hands away from

drive belts when feeding boxes to

machine.  Push boxes from the end only,

DO NOT push with hands on any corners

of the box.

Figure 3-7 – Operation

Operator pushes box against raising switch on

upper frame assembly, as shown in Figure 3-7,

causing the upper frame (taping head) to be

raised above the box.

4. Box is then pushed under belt centering roller

switch (Figure 3-8), which closes drive belts and

conveys box through machine.

Once the box is conveyed from under the upper

taping head, the upper frame assembly returns

to its rest position, ready for insertion of next

box.  Also, box exiting machine, trips box exit

cams which signal drive belts to return to their

full open (rest) position.

5. Turn air and electrical supplies "Off" when

machine is not in use.

6. Reload and thread tape as necessary.

7. Be sure machine is cleaned and lubricated

according to recommendations in

"Maintenance" section of this manual.

Figure 3-8 – Operation 8888 – Operation

Notes

1. Machine or taping head adjustments are

described in "Adjustments", Section 

I

 for

machine or 

 for taping heads.

2. Box drive motors are designed to run at a

moderate temperature of 40°C [104°F].

In some cases, they may feel hot to the

touch.

Box Sealing

Box Jam

If a box should jam or there is a need to shut the

machine off with the upper head assembly in the up

position, the E-Stop button can be pressed or the

guard door can be opened.  Either function will

automatically raise the upper head assembly to its

highest position and the air pressure will be

exhausted from the belt assemblies.  The box can

be removed and the tape should be checked to

insure that it is threaded properly.  When the E-Stop

is pulled up or the door closed the upper head

assembly will lower to the lowest position.

Manual 2

Содержание 3M-Matic 800r3

























































































































Отзывы:

Нет отзывов