manualshive.com logo in svg

3M 3M-Matic 800a3, Инструкция и перечень запасных частей

Поделиться
Скачать
3M 3M-Matic 800a3 Скачать руководство пользователя страница 27

5-SHIPMENT-HANDLING-STORAGE, TRANSPORT

15 

5.1  Shipment and Handling of Packed Machine

-   The machine is 

fi

 xed on the pallet with four (4) bolts

    and can be lifted by using a fork truck. 
-   The package is suitable to travel by land and by air.
-   Optional sea freight package is available.

 

Packaging Overall Dimensions

 

(Figure 5-1)

 See 

Speci

fi

 cations.

 

During the shipment it is possible to stack a 

 

maximum of 2 machines 

(Figure 5-2).

5.2  Packaging for Overseas Shipment

     

  

(Optional

 - 

Figure 5-3

)

The machines shipped by sea freight are covered by 
an aluminum/polyester/polythene bag which 
contains dehydrating salts.

5.3  Handling and Transportation of Uncrated 

 

Machine

The uncrated machine should not be moved except for 
short distances and indoors ONLY. Without the sup-
porting pallet, the machine is exposed to damage and 
may cause injuries. To move the machine use belts or 
ropes, paying attention to place them in the points in-
dicated using care to not interfere with the lower taping 
head 

(Figure 5-4).

5.4  Storage of the Packed or Unpacked Machine

If the machine is not used for a long period, 
please take the following precautions:

-    Store the machine in a dry and clean place.
-    If the machine is unpacked it is necessary to
     protect it from dust.
-    Do not stack anything over the machine.
-    It is possible to stack a maximum of 2 machines
 

(if they are in their original packing).

H

L

W

Figure 5-1

Figure 5-2

   Figure 5-3

  Figure 5-4

2011 September

H

L

W

800a3-NA 

Содержание 3M-Matic 800a3



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды