3M 3M-MATIC 8000a-T, Инструкция по эксплуатации

Страница: 35 / 178

21
8.1 Description of the Working Cycle
After having closed the top fl aps of the carton,
the operator pushes it under the top infeed end in
order to avoid the opening of the top
fl aps. Further
pushing causes the two bottom side belts to drive
the box through the taping heads which automatically
seal the top and bottom seams. The carton is then
expelled from machine belt drives.
8.2 Def i nition of Running Mode
The case sealer
8000a-8000a3
has only one (automatic)
operating mode with:
- The EMERGENCY STOP BUTTON unlocked
(Figure 8-1)
- Turn main start switch “ON” (I)
(Figure 8-2)
8.3.1 Normal Stop Procedure
When the main switch is OFF (O), the machine stops
immediately at any point of the working cycle. The same
thing happens in case of electrical failure or when the
machine is disconnected from the mains.
8.3.2 Emergency Stop
The LATCHING EMERGENCY STOP BUTTON is
located on the top center of the machine
(Figure 8-1).
8-THEORY OF OPERATION
2014 June
8000a-8000a3 - NA
E-Stop Location
Figure 8-1
Figure 8-3
Figure 8-2
Belt Direction