International - ENG
February 2021
3M-Matic
™
7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page 27
Source
Document
for
all
related
Manuals/Translations
44-0009-2164-1 / ECO# 0078045
11.5 Special Set-Up Procedure for Outer Column Re-Positioning
(
continued
)
4. Turn the height adjustment crank clockwise to raise the outer columns until
they reach the stop.
Note:
Instructions are indicated for the Standard Column Position (Also see specifications).
If Alternate Column positions are needed, loosen and re-position the column stop.
5. Tighten the eight (8) screws and washers in each column. Also tighten two (2) Set
Screws (if applicable). Crank upper taping head assembly up and remove blocks.
Moving the outer columns will increase or decrease the box height handled by the
7000a-I / 7000a3-I Pro
case sealer.
Maximum Height:
An additional adjustment can be made to reach Maximum Height. This additional height
adjustment can be made by moving the Upper Assembly Crossbar up to the top holes -
(Figure 11-8).
Figure 11-8
11. Set-Up and Adjustments
(continued)
