3M 3M Matic 120af, Инструкция и перечень запасных частей

Страница: 18 / 82

13
Installation and Set-Up
(Continued)
Note – Case sealer must be installed level, it is
not designed to convey boxes uphill.
Figure 2-2 – Machine Bed Height Adjustment and Lower Tape Drum Bracket
Contact your 3M Representative for assistance
in selecting conveyor requirements and speed
that will comply with your box capability.
11.The lower taping head tape drum bracket has
two mounting positions to allow maximum tape
roll capacity.
For machine bed height 650 mm [25.63 inch]
and above, use mounting position shown in
Figure 2-2B.
For machine bed heights below 585 - 650 mm
[23.00 - 25.63 inch], use mounting position
shown in Figure 2-2C.
Note – A minimum spacing, equal to 405 mm
[16 inch] between boxes at a maximum
conveyor speed of 0.30 m/s [60 F.P.M.] must
be maintained for boxes entering the case
sealer.
Refer to Figure 2-3 for suggested conveyor
types that can be used in production line.
12.Install case sealer in production line.