14
Table 1 – Inspection Checklist
Component:
Inspection:
Pass
Fail
SRL
(Figure 14)
Inspect for loose fasteners and bent or damaged parts.
Inspect the Housing (A) for distortion, cracks, or other damage.
Inspect the Swivel (B) and Swivel Eye (C) or Integral Connector (D) for
distortion, cracks, or other damage. The Swivel should be attached securely to
the SRL, but should pivot freely. The Swivel Eye or Integral Connector should
rotate freely in the Swivel.
The Web Lifeline (E) should pull out and retract fully without hesitation or
creating a slack line condition.
Ensure the SRL locks up when the Lifeline is jerked sharply. Lockup should be
positive with no slipping.
All labels must be present and fully legible (see Figure 19).
Inspect the entire SRL for signs of corrosion.
Web Lifeline
(Figure 15)
Inspect the web lifeline for concentrated wear, frayed strands, broken yarn,
burns, cuts, and abrasions. The lifeline must be free of knots throughout its
length. Inspect for excessive soiling, paint build-up, and rust staining. Inspect
for chemical or heat damage indicated by brown, discolored, or brittle areas.
Inspect for ultraviolet damage indicated by discoloration and the presence of
splinters and slivers on the lifeline surface.
Load Indicator
(Figure 16)
Inspect the Load Indicator to determine if it has been activated. There should
be no evidence of elongation and the cover should be secure and free of tears
or other damage.
End Connectors
(Figure 17)
Figure 1 identifies the End Connectors that should be included on your
Nano-Lok SRL model. Inspect all Snap Hooks, Carabiners, Rebar Hooks,
Interfaces, etc. for signs of damage, corrosion, and proper working condition.
Where present: Swivels (A) should rotate freely, Gates (B) should open, close,
lock, and unlock properly, and Locking Buttons (C) and Locking Pins (D) should
function correctly.
Figure 14 – SRL Inspection
C
D
B
B
A
A
E
E
Figure 15 – Web Lifeline
Cut
Frayed
Heavily
Soiled
Welding
Burns
Figure 16 – Load Indicator
Torn or
Broken
Cover
Deployed and
Torn/Frayed
Webbing
Figure 17 – End Connectors
B
B
B
B
B
A
B
C
D
C
B
Содержание 3101220
Страница 16: ...16 Figure 19 Labeling ...
Страница 17: ...17 Figure 19 Labeling ...
