SM3G III
User’s Manual
9
2.2 Illustration
No. in
Figures
Name on SM3G III
Description
Remark
1
USB Connector
Function reserved
Refer to section 2.2.1 for the
front panel information
2 LAN
Port
To connect to the device and
Ethernet port via RJ45 cable
Refer to section 2.2.1 for the
front panel information
3 Reset
Button
To reset the SM3G III to its
factory defaults
Refer to section 2.2.1 for the
front panel information
4
Power Supply Connector
To connect with the SM3G III
and the power adapter
Refer to section 2.2.1 for the
front panel information
5 LEDs
To display the status of
SM3G III
Refer to section 2.2.3 for the
LED description on the front
panel
6
3G ANT SMA Connector
To connect with the 3G
antenna
Refer to section 2.2.2 for Real
panel information
7 SIM
Card
Slot
To connect with the internal
modem for the access of
Internet
Refer to section 2.2.2 for Real
panel information
8 Switch
Function
reserved
Refer to section 2.2.2 for Real
panel information
2.2.1 Front Panel Information
USB Connector
Function reserved.
LAN Port
SM3G III is designed for 10/100Mbps Ethernet networks. SM3G III connects to the network via
category 5 cable.
Reset Button
Support the hardware reset function. Press 5 seconds around will reboot and reset the device to
factory defaults. For the software reset of the device, you may refer to Section 3.4.3 for
“Configuration Management”.
