6
Assembly
instructions
Assembly Instruction
Step 1
Figure 1
Lay your HP monitor flat on a safe and soft surface. Now
remove the stand of your monitor. Press the white clip at the
bottom of the monitor mount.
Move the white clip of your HP monitor to the position
shown. (Figure 1)
Step 2
Figure 2
Attach the VESA adapter to the mount of your HP monitor as
shown. (Figure 2)
Step 3
Figure 3
Please double check that all screws are properly tightened.
You should hear a "click" when the screws snap into the
mount of the monitor. (Figure 3)
Step 4
Figure 4
Make sure that the VESA adapter is correctly positioned in
the mount, then gently tighten the indicated screw until the
adapter is stable. (Figure 4)
This particular screw is essential to ensure compatibility with
both mounting options of the HP Monitor Series Mf.
