3G Audio AK80, Руководство пользователя, Страница: 11 / 12

0.03
0.05
12V/ S
200
100db
1V
6dB(10KHz)
5.6Kg
8V
ADDITIONAL DESCRIPTION
TECHNICAL SPECIFICATIONS
ACCESSORIES
Please check whether the accessories are complete after you open the
package according to the list below:
Feet
4pcs
User's manual
1pc
Warranty card
1pc
Certificate
1pc
MAINTENANCE
The equipment can be cleaned with dry cotton cloth. If the equipment is
abnormally dirty, please clean it with a piece of cotton cloth dipped in detergent
for 5 to 6 seconds, and finally dry it with a piece of dry cloth.
Don't use alcohol, insecticide, or any other volatile or corrosive liquid to clean
the equipment, which will cause colour fade or flake-off of the equipment surface.
When the equipment is not used for a long time, please keep it in an appropriate
dry place.
Distortion Limit Output Power: 2x80W (THD+N: 0.5%, with 8 load, in stereo/mono mode)
2x120W (THD+N: 0.5%, with 4 load, in stereo/mono mode)
240W (THD+N: 0.5%, with 8 load, in bridge mode)
Frequency Response: 20Hz~20KHz(+/-3dB)with low-cut switch at GENERAL location
100Hz~20KHz(+/-3dB)with low-cut switch at LOWCUT location
Load Impedance: 8 (in mono/stereo mode), 4 (in mono/stereo mode),
8 (in bridge mode)
Harmonic Distortion:
Intermodulation Distortion
Slew Rate:
Damping Factor:
Signal to Noise Ratio:
Minimum Electromotive Force:
Overload Electromotive Force:
HF Compensation:
Dimensions(WxDxH):
Net Weight:
LF Compensation:
6dB(100Hz)
430x160x43.8mm(without feet)
: