Installation
Prepare
1
2
Install Brackets
adhere Brackets to surface. Brackets may be installed
with screws (3-15-2448) if desired.
*If in the future it is
necessary to remove
the adhesive, follow the
instructions in this video:
https://www.youtube.com/watch?v=6-VSl9w7b4M
a
Clean Surface
Stage the Brackets (3-15-2440).
The bracket location on Felt Screens is
pre-determined based on fabrication detailing.
b
With screen in place mark position of brackets. Then
set screen aside until Step 3.
d
a
remove protective film
from brackets.
b
Bend screen past 90° to ensure final bend is 90°.
Do not unbend screen after bending.
c
For more information, please visit 3-form.com or call 800.726.0126
January 2021 | Man-rTG-200-70 | rEV 001 © 2021 3form, Inc. all rights reserved.
3
Ready To Go
SimpleSpec 200.70-Desk Partition U
tm
Installation Manual
