WIRING
1
Wiring the transmitter
Transmitter wired to battery
and AV input cable
Connect battery here
Connect OSD module here
Attach an antenna to the transmitter. The red, black, and white
three-wire cable connects the transmitter to the GND, +12V, and
VOUT pins on your on-screen display (OSD) module. The red and
black two-wire cable connects the transmitter to a power source.
2
Wiring the receiver
Attach an antenna to the receiver. Connect the AV output cable
to either receiver AV OUT port, and connect the DC power cable
from the DC power port to a power source (shown below with
battery connected).
CONTENTS
Your 3DR Video Transmitter Kit includes:
Wireless AV transmitter
Wireless AV receiver
Antennas (2)
Transmitter cables:
Red and black two-wire cable
Red, black, and white three-wire cable
Receiver cables:
DC power cable
AV output cable
5.8GHz 200mW Wireless AV Transmitter Specifications:
•
Frequency/channel: 5705-5945 MHz/8 CH
•
Output power: 200 mW/33 dBm
•
Frequency control: Built-in frequency & phase lock loop
•
AV Input: Analog AV signal input
•
ANT connector: RP-SMA
•
Power supply: DC 7-12 volts
•
Current supply: 850 mA
•
Dimensions: 68 mm x 26 mm x 28 mm
•
Weight: 60 g (incl. antenna)
•
Gross weight: 85g
5.8GHz Wireless AV Receiver Specifications:
•
Receiving frequency: 5705-5945 MHz/8 CH
•
Receiving sensitivity: -90 dBm
•
Antenna connector: RP-SMA
•
Power supply voltage: DC 7-12 volts
•
Supply current: 150 mA
•
Dimensions: 61 mm x 52 mm x 13 mm
Transmitter wired to battery and AV output cable
WIRING
1
Wiring the transmitter
Transmitter wired to battery
and AV input cable
Connect battery here
Connect OSD module here
Attach an antenna to the transmitter. The red, black, and white
three-wire cable connects the transmitter to the GND, +12V, and
VOUT pins on your on-screen display (OSD) module. The red and
black two-wire cable connects the transmitter to a power source.
2
Wiring the receiver
Attach an antenna to the receiver. Connect the AV output cable
to either receiver AV OUT port, and connect the DC power cable
from the DC power port to a power source (shown below with
battery connected).
CONTENTS
Your 3DR Video Transmitter Kit includes:
Wireless AV transmitter
Wireless AV receiver
Antennas (2)
Transmitter cables:
Red and black two-wire cable
Red, black, and white three-wire cable
Receiver cables:
DC power cable
AV output cable
5.8GHz 200mW Wireless AV Transmitter Specifications:
•
Frequency/channel: 5705-5945 MHz/8 CH
•
Output power: 200 mW/33 dBm
•
Frequency control: Built-in frequency & phase lock loop
•
AV Input: Analog AV signal input
•
ANT connector: RP-SMA
•
Power supply: DC 7-12 volts
•
Current supply: 850 mA
•
Dimensions: 68 mm x 26 mm x 28 mm
•
Weight: 60 g (incl. antenna)
•
Gross weight: 85g
5.8GHz Wireless AV Receiver Specifications:
•
Receiving frequency: 5705-5945 MHz/8 CH
•
Receiving sensitivity: -90 dBm
•
Antenna connector: RP-SMA
•
Power supply voltage: DC 7-12 volts
•
Supply current: 150 mA
•
Dimensions: 61 mm x 52 mm x 13 mm
Transmitter wired to battery and AV output cable
