45 degree mesh
reinforced fuselage
Reinforced
motor mounting points
External power connection
Front part of fuselage
printed in one piece
Fixed rudder
... print your plane | www.
3DLabPrint
.com
Changes
• Fuselage reinforcement (45 degree mesh in the fuselage)
• Fixed rudder (removed rudder horn and bowden tube), redesigned to glue the rudder to the fuselage
• Battery connection from outside (two channels for cable output to connect the battery after the wing
has been attached)
• Front part of fuselage printed in one piece, for added strength and faster assembly
• Reinforced motor mount points
3
