Page
29
of
44
3DGence Material Management System | version 1 | 03.2022
Fig. 32 Screens related to manual date and time setting
1.2.3
Language screen
Fig. 33 Screen related to language change on the device (language)
1.2.4
Storage settings
Storage control
–
By default the option is in the "off" position which results in automatic control of temperature and time
parameters for the storage mode. To activate manual control of the storage mode parameters, move the indicator to the "on"
position.
Temperature
–
The option allows you to set your own temperature setting for storing materials after the process is complete.
The temperature can be set between 50°C and 80°C.
Time limit
–
The option allows you to set a time limit that will apply to the changed material storage temperature. The time
limit can be set from 1 minute to 99 hours and 59 minutes.
