3devo GP20 Hybrid, Руководство пользователя

Страница: 46 / 92

42
3.3.3. CLEANING THE GP20 SHREDDER
⚠
WARNING
Make sure the machine is turned off and the power plug is removed before
proceeding with the next steps!
Step 1) Remove the Hopper from the machine
Step 2) Remove the Container from the machine
⚠
WARNING
Always wear cut resistant gloves when working around and inside the cutting chamber.
Step 3) Remove the Scraper combs as shown in chapter 3.5.2.1
Step 4) Clean the scraper combs and the cutting chamber using the following
tools:
•
Vacuum cleaner
• Pressurized air
•
Brush
•
Screwdriver,
•
Tweezer (or similar object)
Step 5) Optional:
a. to thoroughly clean cutting chamber of the shredder, you can take
the shredder blades out as shown in chapter
3.5.2.2
b. Clean the shredder blades, shredder spacers
c. Carefully reinstall the shredder blades and shredder spacers and
reinstall the front plate.
3.3.4. CLEANING THE GP20 GRANULATOR
Step 1) If applicable, let the machine run until all the remaining material
inside the GP20 Granulator is processed. This can be heard by the decreasing
noise or checked by regularly turning off the machine and checking the
Container.