14
Getting started guide for Windows
........
........
Assign frequent application functions to controller buttons
Map motion controller buttons to key application
functions to create your own keyboard shortcuts.
Most applications have default mappings pre-
confi gured, or you can create your own.
To confi gure button mapping, double click the
3Dconnexion icon located in your Windows system
tray and access the confi guration control panel.
For more on button mapping refer to the users’
manual located on the install CD.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. This device requires shielded
interface cables to ensure compliance. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to the equipment not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
The information in this guide is subject to change without notice. 3Dconnexion shall not be held liable for technical or editorial errors
or omissions contained herein, nor for incidental or consequential damages resulting from the furnishing, performance or use of this
material. © 2004 3Dconnexion. All rights reserved. 3Dconnexion, the 3Dconnexion logo, and SpaceMouse®, SpaceBall®, SpaceWare®,
3DxWare™, CadMan®, SpaceTraveler™, Two Handed Power™ and 3Dconnexion* are registered USA and European trademarks of
3Dconnexion.
Adobe Photoshop, Adobe Acrobat, QuarkXPress, Microsoft Word, Microsoft Excel
and All other trademarks are the property
of their respective owners.
FCC declaration of conformation
Windows System Tray
