CONFIDENTIAL & PROPRIETARY
DO NOT DISTRIBUTE
PAGE 1 OF 3
5246 SW 8
TH
ST, STE 204-A . Coral Gables, FL. 33134 || 786.701.0700 || www.3DChimera.com
X400 Y-AXIS BELT REMOVAL
REVISION
DATE
DESCRIPTION
AUTHOR
A01
09.18.15
Initial Release
AH
> INTRODUCTION
This procedure is intended to guide you through removing the Y-Axis belt. This may be necessary in the
following cases:
•
Y-Axis motor needs to be checked for function
•
Y-Axis motors needs to be replaced (i.e. broken shaft)
•
Adjustment of the pulley on the Y-Axis motor
•
Installation of the Y-Axis Upgrade Kit
•
Replacement of the Y-Axis Belt
•
Tension adjustment in the Y-Axis Belt
> PROCEDURE
1.
Remove the top panel
2.
Remove the side panel hex nuts & handle screws
