3D3 CLASSIC A1111, Руководство пользователя

Страница: 3 / 8

prepare for installation
n
Ensure that only the TV you wish to use with the
3D3 Eyewear is switched on.
n
Set the TV to 3D mode (refer to the TV operating
instructions).
n
Stand less than 1 metre from the TV.
installation
n
With the 3D eyewear switched off, press and hold the
function button for five seconds. The indicator light
will flash until the 3D signal is detected and then
extinguish. You should now be viewing 3D images.
n
If the 3D signal has not been detected, check that
there is nothing blocking the signal from the TV to
the eyewear and repeat the process.
charging
n
When the battery is low, the blue indicator light will
flash for approximately five seconds when switching
on. Connect the supplied cable to the charging port
and the other end to any suitable USB charger or port
on a TV, laptop or desktop computer. The indicator
light will illuminate red until fully charged and then
extinguish.