37
v i e w p o r t a n d v i e w o b j e c t
Viewing Controls
The Viewing Control and the mouse can give you control of the view port by rotating around the
x-, y-, and z-axis; zooming in and out; panning left, right, up, and down; and viewing a predefined
condition. Clicking and releasing gives you an instant response; clicking and holding
gives you a continuous response.
To
zoom in or out
, click on the square in the middle of the right side of the control.
To
rotate
, click on the red outer circle on the viewing control’s left side; then click on the arrow
that describes what rotation that you want.
To
pan
, click on one of the pentagons on the right side of the viewing control; then click on the
direction in which you want to pan.
70696 Revision 1C 27-Aug-08
