8/11/22, 10:07 AM
Quick Start Guide
infocenter.3dsystems.com/projetmjp5500x/print/book/export/html/966
11/13
Place the platform in a freezer for ten to fteen minutes. As the parts and platform cool, they
contract at different rates and separate.
Alternatively, the parts can be mechanically separated from the build platform by force using a
tool with a stiff thin blade such as a putty knife. Make certain you do not mark the platform.
For more information on how to clean parts, refer to the VisiJet Material Handling Guide.
Empty Waste Drawers
Personal protection equipment is required before opening waste drawer. Follow all material
handling and disposal guidelines. Always follow Global Health and Safety guidelines and
local regulations regarding handling and disposal of regulated materials. Keep disposal
records if local law requires.
CAUTION: Wear protective gloves before removing any waste material. Be careful not to
spill, drop, or expose others to these materials. Dispose the material according to your local
regulatory guidelines.
NOTE: When removing the draped portion of the bag, be careful not to spill the
material that may be on the top portion of the bag.
1. Open the upper left and upper right MDMs.
2. Slide both waste drawers completely out of the printer.
3. Remove
waste bags
from waste drawers and place into a hazardous waste container.
4.
Replace
the plastic
waste bag
for each drawer.
5. Close waste drawers and press the
Start
to resume.
Standby and Conserve Mode