3. Double click the
Material,
(A)
, to load,
when material appears in the top block, it
is loaded. Click on
Next
(B).
NOTE: If there already is material
loaded, you must first unload that
material before loading anything new.
Click on loaded material and select
Unload
.
Adding Printer
1. Open the 3D
SPRINT
application. Click on
the
Print Setup
module (A).
2. Select the printer you want to add (B).
Select
Next
(C).
NOTE: It may be necessary to
manually add the IP address in the
space provided (D) if the desired
printer is not on the list.
5. Test the connection under the
Printer Tools
(A) by selecting
Test Post Cure
(B).
NOTE: The curing chamber
carousel should rotate if the
printer is connected and the display will
show
Testing
and information window
will say
Testing
.
NOTE: The door must be closed for
the UV chamber to work.
Printing a part
At this point, machine is ready to print a part.
Follow along in the User Guide to do so.
NOTE: Get more information about
the
3D
SPRINT software by clicking
on the
Help Command or pressing F1
.
NOTE: Do not move the machine
with the cartridge inside once it is
opened.
ProJet 1200™
Setup
Please refer to the ProJet1200 User Guide for safety and comprehensive operating instructions. You can find the ProJet 1200 User Guide on 3DSCentral.com.
SAVE ALL FOAM AND PACKING MATERIAL FOR FUTURE USE. SHIPPING WITHOUT THE ORIGINAL PACKING MATERIAL MAY CAUSE DAMAGE TO THE PRINTER.
Create Account
Type
http://3dscentral.3dsystems.com
in
your browser. You will need to create an
account (your email will be used as the
User ID) and choose an easy to remember
password. Your printers serial number
appears on the back of the machine. After
registration an email will be sent to you
with a link to the 3D Systems 3DS Central
login page.
Installing Software
1. Go to
https://3dscentral.3dsystems.
com
and enter your user name and
password.
2. Select Products.
3. Select Professional 3D Printers from
the left navigation bar.
4. Select ProJet 1200 from the drop-
down menu.
5. Download the
3D
SPRINT
software
by selecting the filename under the
software header.
6. Double-click file that was just
downloaded to begin installing
software.
7. Before leaving 3DS Central download
any documentation needed including
the
User Manual
.
Connecting Printer
1. Connect
ONLY
the A/C power cord
to utility power and then connect the
power supply to the power inlet (A) on
the printer. Ensure printer is fully booted
before proceeding.
2. If connecting to a network, connect the
printer Ethernet port (B) to the network
with an Ethernet cable. If connecting via
USB connection see Step 3.
A
3. If connecting via USB without a
network, follow (previous) Step 1, when
LCD display shows
ProJet 1200 Ready
connect machine via USB cable (C). Once
printer is connected, display will show
USB
Connected
.
B
C
Check Cartridge
The Check Cartridge command is used to check
the material level of cartridge as well as ensuring
the cartridge is properly inserted.
1.
Click
Check Cartridge
on the Help tab.
2.
A dialog window will appear showing
remaining material.
NOTE: If the cartridge is not properly
inserted, an error will appear. Check
that the cartridge with the chip is properly
inserted and try again.
Error
Failed to check cartridge. Please make sure the cartridge is
properly inserted.
OK
Activating Printer
Before any parts may be printed, you must first
activate your printer.
1.
Select
Post Cure
from the
Printer Tools
screen.
2.
Fill out the information in the activation
fields (A).
3. Select
OK
(B).
Printer is now activated and is able to print parts.
C
©2015 3D Systems, Inc. All rights reserved.
pn 341411-00 Rev. F
A
B
A
B
A
B
A
B
4. The next window that will pop up is the
Print Mode
screen. Double click the
desired
Print Mode,
(A)
, to load from the
list of available modes. Click on
Set
(B).
A
B
C
