FabPro 1000 Setup
Please see the FabPro 1000 User Guide, found on support.3dsystems.com/fabpro, for safety information and com-
prehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may
cause damage to the printer.
©2018 3D Systems, Inc. All rights reserved.
P/N
45-D09
Rev. A
17. Send .PXL File to Printer/
Register Printer
1.
Click
Add to Queue
to send the
.pxl file to the printer.
2. This will generate a pop-up in 3D
Sprint. Fill out your information
to register your printer.
18. Begin Print Process
1.
On printer,
Press
power button
on screen 1.
2.
Hold down
button on screen 2.
3.
Screen 3 will show the name of
your print job.
Hold down
the
button to continue.
1
2
3
Whenever printer says “hold
btn,” this is a 3-second hold.
Holding the button for 8 seconds
will shut down the printer.
19. Scan Material Bottle
When you see the screen above (1),
hold the bottle’s QR code under the
QR-code scanner’s targeting light.
Do not look into the scanner.
1
20. Fill Print Tray
1.
You will see the screen above (1).
2. Pour material into tray until the
material reaches the
mid
step
that is molded into the print tray.
Always wear nitrile gloves
when handling materials and/
or printer components.
1
21. Begin Print
Shut printer door.
Hold down
power
button to start print. You will see
the screen above (1) during printing.
When the print is done, follow the
steps in the
Post-Processing
section
of the
User Guide
.
1
Other Useful Documents
Please see
http://support.3dsys-
tems.com
/fabpro
for up-to-date
versions of the following documents:
FabPro 1000 User Guide
- See full
details regarding safety, facility
requirements, post-processing
instructions, and more for your
printer.
Safety Data Sheets and Instruc-
tions for Use
- SDS and IFUs ship
with each material. They are also
available on
https://www.3dsystems.
com/materials
.
3D Sprint Online Help
- Launch on
-
line help by pressing
F1
or clicking
the
icon while in the software.